Gives a hemp anchor cable an eye at one end that forms by itself while the cable is being laid up, because two of its strands are made from a single long rope doubled at the middle; according to Nares, a cable had this eye at one end and an Elliott's eye at the other.
Getting an eye that needs no splice at the inboard end of a hemp anchor cable while the cable is being laid up; according to Alston and Luce, also making collars on four-strand stays.
When
Unknown; the earliest of the sources consulted is the 1865 edition of Nares's Seamanship.
Who devised it
Unknown.
Where the name comes from
The sources do not explain the name; according to Nares and Ashley the eye is formed in rope making, while the cable is being laid up.
Its story
The rope-maker's eye is an eye formed at one end of a hemp anchor cable while the cable is still being laid up. According to Nares's Seamanship, hemp cables had this eye at one end and an Elliott's eye at the other: two of the cable's strands are laid up from a single long rope doubled at the middle, so an eye appears at one end by itself; the third strand also gets an eye at its end, and that strand's smaller strands are wormed round the cable without being spliced. Ashley likewise writes that the eye was formed in the rope walk while the cable was being made and that it was used at the inboard end of the cable. Alston and Luce also give the same name to another job: making the collar of a four-strand stay by dividing its strands two and two and doubling them back.
On a rope that has already been laid up: the eye can only be formed while the rope is being made, and for an eye added later the sources describe splices such as the Elliott's eye.
Weakness
It can only be made in the rope walk while the cable is being laid up; it cannot be added on board afterwards and cannot be used on rope that will not open into strands.