Cut splice TR

Splices and whippings

Cut splice

Splices the ends of two ropes into each other to leave a long, permanent eye partway along the line, to go over a boom-end or similar spar.

Hard No ABoK number Sailing and boatingLoads and everyday jobs

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

How to tie it

  1. Cut the rope in two or take two ropes, and unlay the strands at each end as if preparing a short splice.
  2. Lay the two ropes side by side in opposite directions so that each unlaid end rests against the other rope's standing part, leaving a gap between the two ends as long as the eye you want.
  3. Work the first rope's strands into the second rope's standing part as in an eye splice, each strand going OVER one strand of the lay and UNDER the next.
  4. Do the same with the second rope's strands in the first rope's standing part; a long eye remains between the two splices.
  5. If you like, cover the spliced sections by serving them tightly with small line.

The method was checked against: R. H. Dana, The Seaman's Friend (5. baskı, 1847), s. 46: A cut splice (Gutenberg #40958), P. N. Hasluck (ed.), Knotting and Splicing Ropes and Cordage (1907), Fig. 117–118, s. 92–93 (Gutenberg #70874).

Origin and story

Why it was needed
Making a permanent eye, or collar, partway along a rope to go over a boom-end; keeping a splice from working loose in light lines that are often wet.
When
Unknown; Wikipedia traces its use to Falconer's marine dictionary of 1780, and Dana describes it in 1847.
Who devised it
Unknown.
Where the name comes from
According to Wikipedia, the present English name is a toned-down form of an older, coarse one; in Swedish it is called 'kluven splits' or 'korgstropp' (Öhrvall).

Its story

A cut splice joins two ropes by splicing each end into the other rope a little way along, so that a long eye is left in the middle of the line; under strain the eye closes and lies flat. Citing Falconer's marine dictionary of 1780, Wikipedia says it was used on light lines such as the log-line, which were often wet and on which a single splice tended to work loose; it also notes that the present name is a toned-down form of an older, coarse one. Dana (1847) uses it to fit the jib-boom foot-ropes and the spanker-boom guys over the boom-end, and Brady's The Kedge-Anchor gives it as a way of forming a collar partway along a rope, listing jib-guys, backstays and shrouds among its uses. Öhrvall (1916) gives the Swedish names 'kluven splits' and 'korgstropp' and says it is used where two ends must be fastened to the same spar, instead of an eye in each; Dana and Pearl (1921) add that it keeps the rings of a rope ladder in place and can fasten a pole or rod partway along a line.

Source: Wikipedia: Rope splicing (Types of splice: Cut splice), R. H. Dana, The Seaman's Friend (5. baskı, 1847), s. 46 ve donanım bölümü (flok ve randa bumbaları) (Gutenberg #40958), W. N. Brady, The Kedge-Anchor (6. baskı, 1852; ilk baskı 1847), No. 25 (Gutenberg #77729), F. Öhrvall, Om knutar (2. baskı, 1916), s. 175 (Project Runeberg), Dana & Pearl, The Use of Ropes and Tackle (1921), Fig. 48 (Gutenberg #56585).

No sourced Turkish name yet.

Where not to use it
For temporary connections that will be taken apart later; a splice is permanent work and cannot be cast off quickly like a knot.
Weakness
It takes two separate splices and some time to make, and the spliced sections thicken the rope.

Similar and alternative knots

Sources and verification

  • The card was written in our own words from Wikipedia and Wikidata data; the tying method has not yet been checked against two sources.