Loop
Directional figure eight
A figure-eight loop set to take load from one direction; used as an intermediate attachment on fixed lines.
Life safety: This knot is used in climbing, rescue or tree work. This app does not replace hands-on training; for life-safety work, practise under an instructor.
How to tie it
- Where the eye will be, make a loop: bring the working part OVER the standing part. (When tying with a bight, the bight does this.)
- Take it around BEHIND (under) the standing part.
- Pass it through the loop: OVER the edge of the loop, UNDER the standing part.
- Lead it up, OVER the bar (karabiner) and back UNDER it: the eye is the tip of the bight.
- Like the other leg of the bight, follow your path back alongside it: UNDER the standing part, OVER the edge of the loop, UNDER the standing part.
- Go OVER the standing part, then UNDER both strands; come up outside the loop and lead it away as the continuing line.
- Dress and tighten the knot; load the eye only in the direction it was tied for.
The method was checked against: Animated Knots: Directional Figure 8 Loop, Wikipedia: Directional figure eight.
No sourced Turkish name yet.
- Where not to use it
- Where load may come from the opposite direction.
- Weakness
- The loop rolls over if loaded the wrong way.
Similar and alternative knots
Sources and verification
- Wikipedia: Directional figure eight
- Wikidata: Q4313007
- The tying steps were played in the rope engine to produce the checking signature; the comparison with two independent sources is in docs/pilot-baglar.md.