Horseshoe splice TR

Splices and whippings

Horseshoe splice

A horseshoe-shaped splice of sailing-ship rigging, made like a cut splice but with legs of unequal length, used to seat shrouds and backstays over the masthead; it joins the legs with a splice instead of a seizing.

Hard No ABoK number Sailing and boating

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

Origin and story

Why it was needed
Seating shrouds and backstays over the masthead with a splice instead of a seizing, whether for an odd rope left over on each side or for a pair whose legs must stand apart.
When
Unknown; no date of origin appears in the sources. It is described in seamanship books from Brady's 1852 edition to Wilson-Barker (1909).
Who devised it
Unknown.
Where the name comes from
The sources do not explain the name; Brady and Nares describe the rope taking a horseshoe shape at the masthead.

Its story

The horseshoe splice was a splice resembling the cut splice, used on the standing rigging of sailing ships where it went over the masthead. W. N. Brady's The Kedge-Anchor (sixth edition, 1852) writes that an odd shroud or backstay left over on each side was fitted 'horse-shoe fashion' to go over the masthead. S. B. Luce's Seamanship (third edition, 1868), compiled for the United States Naval Academy, says the splice is made like a cut splice but has a different shape, adding that odd backstays could be fitted this way and the splice then served over; A. H. Alston (1871) puts the difference down to legs of unequal length. G. S. Nares's Seamanship (1877) describes a case where a pair of shrouds must have its two legs held well apart at the masthead: seizing the bight with a throat seizing would overload the seizing and also bend the rope, so each leg instead gets a short length of rope spliced into it, which gives a horseshoe-shaped splice. D. Wilson-Barker, in 1909, still names it among the kinds of splice he lists, next to the short, long, eye and cut splices.

Source: W. N. Brady, The Kedge-Anchor (6. baskı, New York, 1852; telif kaydı 1847), §87, §101, §118 (Gutenberg #77729), S. B. Luce, Seamanship: compiled from various authorities (U.S. Naval Academy; 3. baskı, önsöz Mayıs 1868, 1877 basımı), 'Splicing', s. 17-18, Levha 12, Şekil 107 (Internet Archive), A. H. Alston, Seamanship (1871), §209 'Horse-shoe Splice', s. 161 ve donanım bölümü (Internet Archive), G. S. Nares, Seamanship (5. baskı, 1877), 'Horse Shoe (Fig. 97)', s. 27 ve soru-cevap bölümü (Internet Archive), D. Wilson-Barker, A Manual of Elementary Seamanship (5. baskı, London: Griffin, 1909), 'Splicing', s. 23-24, Levha VII (Internet Archive).

No sourced Turkish name yet.

Where not to use it
In temporary connections that must be rigged and taken down quickly; a splice is permanent work.
Weakness
The sources say nothing about its strength; for an odd number of shrouds, Alston recommends giving each its own eye splice and putting those on the mast first instead of joining them with a horseshoe splice.

Similar and alternative knots

Sources and verification

  • The card was written in our own words from Wikipedia and Wikidata data; the tying method has not yet been checked against two sources.