
Friction hitch
Blake's hitch
An adjustable friction hitch tied on the rope itself, used in tree climbing.
Life safety: This knot is used in climbing, rescue or tree work. This app does not replace hands-on training; for life-safety work, practise under an instructor.
How to tie it
- Take the working end OVER the climbing line and back BEHIND (under) it: the first wrap.
- Make a second wrap the same way, working upward: OVER, then UNDER. Keep it loose so the end can pass through later.
- Make two more wraps upward, each OVER then UNDER: four wraps in all.
- Bring the end down beside the wraps and OVER the standing part.
- Pass the end BEHIND (under) the climbing line to the other side.
- Tuck the end up through the inside of the bottom two wraps (UNDER their fronts, OVER their backs) and out.
- Dress the wraps, set the hitch and tie a stopper in the end.
The method was checked against: Animated Knots: Blake's Hitch, Wikipedia: Blake's hitch.
No sourced Turkish name yet.
- Where not to use it
- In untrained hands.
- Weakness
- Slips if it is not dressed correctly.
Similar and alternative knots
Sources and verification
- Wikipedia: Blake's hitch
- Wikidata: Q881229
- The tying steps were played in the rope engine to produce the checking signature; the comparison with two independent sources is in docs/pilot-baglar.md.