Splices and whippings
Common whipping
Turkish: Gizli piyan bağı
Wraps the end of a rope with thin twine to stop it fraying; the end of the twine is hidden under the turns.
How to tie it
- Form a bight in the twine and lay it along the rope, the bight pointing to the rope's end; the short end hangs toward the standing part.
- Wrap the long end round the rope and the bight together: OVER the rope and both legs in front, UNDER them at the back.
- Keep wrapping tightly side by side toward the rope's end (three turns here; in practice as wide as the rope is thick).
- Tuck the working end through the bight: in OVER its leg, out UNDER its end.
- Pull the short end to draw the bight and the working end under the turns to the middle; trim both ends close.
The method was checked against: MEB MEGEP, Gemici Bağları modülü (2014), s. 15, A. Hyatt Verrill, Knots, Splices and Rope Work (1917), Bölüm II, Şekil 4, Wikipedia: Common whipping.
Turkish names, by who uses them
- Seafarers: Gizli piyan bağı
- General use: Gizli piyan bağı
Main Turkish name from seafarers · MEB, KÜRE (Deniz Harp Okulu)
- Where not to use it
- On its own on ends that chafe constantly (the sailmaker's whipping lasts longer).
- Weakness
- Can slide off over time.
Similar and alternative knots
Sources and verification
- Wikipedia: Common whipping
- Wikidata: Q5153640
- The tying steps were played in the rope engine to produce the checking signature; the comparison with two independent sources is in docs/pilot-baglar.md.