Weaves the end of a rope back between its own strands to make a permanent, strong eye.
HardABoK 17, 2745, 2754Sailing and boatingTree work
Life safety: This knot is used in climbing, rescue or tree work. This app does not replace hands-on training; for life-safety work, practise under an instructor.
Unlay the strands a few turns and tape or whip the end of each strand.
Set the size of the eye; tuck the first strand from the end towards the standing part, under one strand of the standing part.
Tuck the second strand in where the first came out; turn the eye over and tuck the third so that it comes out where the first went in. One strand enters and leaves each gap.
Keep weaving each strand over one strand of the standing part and under the next; at least five rounds in synthetic rope, at least three in natural fibre.
Trim the ends leaving a little to spare and roll the splice on a hard surface to settle it.
A permanent eye in the end of a rope, much stronger than a knot: according to MEB the loss of strength is 5–10%, against 30–35% for a bowline.
When
Unknown; the sources give no date.
Who devised it
Unknown.
Its story
The eye splice makes a permanent eye in the end of a rope by weaving the end back between its own strands. The MEB module on ropes and rope work describes it as an easy splice and the one most used in amateur and professional seamanship; used with a thimble it costs the rope only 5–10% of its strength, while the bowline, the knot most used for a temporary eye, costs 30–35%. Verrill in 1917 describes it as made in the same way as the short splice, but into the rope's own standing part.