Hitch
Tensionless hitch
Turkish: Düğümsüz
Ties a rope to a thick tree or post with several full wraps; friction takes the load and no knot is strained.
Life safety: This knot is used in climbing, rescue or tree work. This app does not replace hands-on training; for life-safety work, practise under an instructor.
How to tie it
- Tie a figure-eight loop in the end, leaving plenty of rope, and clip a carabiner into it (not drawn here).
- Wrap the rope three times round the post (tree): OVER it and back UNDER it each time; keep the turns side by side, never crossing.
- Clip the carabiner round the standing part: the end goes OVER it and back UNDER it.
- If there is a kink in the standing part or a crossed turn, fix it; the load is on the standing part and the friction of the turns holds it.
The method was checked against: Wikipedia: Tensionless hitch, Animated Knots: Tensionless Hitch.
Turkish names, by who uses them
- General use: Düğümsüz, Tam dayanıklı çift düğüm
Other English names: high-strength tie-off, No-Knot
Main Turkish name from general use · AFAD Akarsu Kurtarma
Sources for the names
- Where not to use it
- On thin anchors (the anchor should be several times thicker than the rope).
- Weakness
- Slips with too few wraps or too thin an anchor.
Similar and alternative knots
Sources and verification
- Wikipedia: Tensionless hitch
- Wikidata: Q16258641
- The tying steps were played in the rope engine to produce the checking signature; the comparison with two independent sources is in docs/pilot-baglar.md.