Heaving line bend TR

Bend

Heaving line bend

Ties a light heaving line to the eye or end of a heavy hawser.

Medium No ABoK number Sailing and boating

How to tie it

  1. The heavy rope lies as a bight: its standing part on the left, its short end on the right. Bring the end of the light line OVER the bottom of the bight and up through the middle of it.
  2. Take the end OVER the standing leg of the bight to the left, down its outside and back into the bight UNDER it: a turn round the standing leg.
  3. Cross the end OVER its own part to the right and out UNDER the short leg (across the back).
  4. Bring the end back to the left OVER the short leg, its own part and the standing leg.
  5. Tuck the end up UNDER the turn you made round the standing leg: it is nipped between that turn and the leg and points the same way as the heavy rope.
  6. Pull both ropes to tighten. The knot does not jam when the light line is hauled.

The method was checked against: Wikipedia: Heaving line bend, Öhrvall, Om knutar (1916), s. 61, şekil 54 (Project Runeberg).

No sourced Turkish name yet.

Where not to use it
Between two ropes of the same thickness.
Weakness
Not made for constant load.

Similar and alternative knots

Sources and verification