Bend
Flemish bend (figure-eight bend)
Turkish: Açık sekizli
Joins two ropes securely with the figure-eight structure and is easy to inspect.
Life safety: This knot is used in climbing, rescue or tree work. This app does not replace hands-on training; for life-safety work, practise under an instructor.
How to tie it
- A loose figure-eight is tied in the end of the first rope. Lay the end of the second rope beside the first rope's end where it leaves the knot and feed it in: pass UNDER the first rope's standing part.
- Follow the first rope's path backwards, always on the same side: OVER the edge of the loop, UNDER the standing part.
- Keep following: OVER the standing part, then UNDER both strands.
- Go round beside the arc of the loop to the standing part.
- Come down beside the first standing part: OVER two strands, UNDER two, OVER two. The end comes out beside the first standing part.
- Pull each of the four strands to dress and tighten the knot; the strands must lie side by side.
The method was checked against: Wikipedia: Flemish bend, NetKnots: Flemish Bend.
Turkish names, by who uses them
- Climbers: Açık sekizli
Main Turkish name from climbers · AUZEF Dağcılık
Sources for the names
- Where not to use it
- Where it must come undone easily.
- Weakness
- Can jam after a heavy load.
Similar and alternative knots
Sources and verification
- Wikipedia: Flemish bend
- Wikidata: Q1817154
- The tying steps were played in the rope engine to produce the checking signature; the comparison with two independent sources is in docs/pilot-baglar.md.