
Hitch
Pile hitch
Turkish: Iskarmoz bağı
Ties onto a post or bollard very quickly with a bight dropped over the end of the post.
How to tie it
- Take a bight in the rope and lay both legs together OVER the post and back BEHIND (under) it. (Here the bight is traced with the end: the inner leg first.)
- Bring the bight across OVER the legs towards the end of the post and drop the loop over the post end: OVER the post.
- The other side of the loop comes back UNDER the post and UNDER the legs: the loop grips the post and the legs together.
- Take the outer leg of the bight (the end) back round the post: up UNDER it and down OVER it.
- Bring the end down beside the standing part: it passes UNDER the upper side of the loop and OVER the lower side.
- Pull the standing part to tighten; the standing part takes the load.
The method was checked against: Animated Knots: Pile Hitch, Wikipedia: Pile hitch.
Turkish names, by who uses them
- General use: Iskarmoz bağı
Main Turkish name from general use · TÜBİTAK Bilim Çocuk
Sources for the names
- Where not to use it
- When you cannot reach the end of the post.
- Weakness
- Cannot be used if the bight cannot go over the end.
Similar and alternative knots
Sources and verification
- Wikipedia: Pile hitch
- Wikidata: Q3533298
- The tying steps were played in the rope engine to produce the checking signature; the comparison with two independent sources is in docs/pilot-baglar.md.