Long splice TR

Splices and whippings

Long splice

Turkish: Matiz dikişi

Joins two three-strand ropes end to end with almost no extra thickness at the join, so the spliced rope still runs through blocks and tackle.

Hard No ABoK number Sailing and boatingLoads and everyday jobs

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

How to tie it

  1. Open up the strands at both rope ends, much farther than you would for a short splice; tape the strand ends and put a thin seizing where the opened part stops.
  2. Butt the two ends together so the strands interleave, each strand sitting between two strands of the other rope.
  3. Unlay one strand of one rope backward and, as you go, lay the matching strand of the other rope into the empty groove, keeping its twist; go a good distance.
  4. Do the same in the other direction with another pair of strands; the third pair stays in the middle, where you started.
  5. This leaves three meeting points spaced along the rope; at each, join the two opposing strands with a single half knot.
  6. Tuck each strand end into the rope a few times, going over one strand and under the next, the way you would for a short splice.
  7. Stretch the rope hard, roll the splice smooth and trim off the spare ends.

The method was checked against: MEB MEGEP, Halatlar ve Halat İşleri modülü (2016), s. 44–45, Şekil 3.21–3.25, A. Hyatt Verrill, Knots, Splices and Rope Work (1917), Bölüm V, Şekil 107.

Origin and story

Why it was needed
Joining two ropes end to end with a splice thin enough to run through blocks and tackle.
When
Unknown; it is described in the 1847 (fifth) edition of R. H. Dana's The Seaman's Friend.
Who devised it
Unknown.

Its story

The long splice joins two three-strand ropes end to end with almost no extra thickness: some strands are laid into the grooves left when strands of the other rope are unlaid, so the join is spread over three places far apart along the rope. R. H. Dana described it for seamen in the 1847 edition of The Seaman's Friend. Verrill wrote in 1917 that a rope spliced this way still passes through any block that takes the plain rope, and that after a few days in service a well-tied one looks just like the rest of the rope. The Turkish Ministry of Education rope module recommends it instead of the short splice for ropes that run through tackle or blocks, but notes that in synthetic rope the strands slip out more easily, so today it is seldom chosen for rigging and is made mostly for decoration.

Source: Wikipedia: Rope splicing (Types of splice), R. H. Dana, The Seaman's Friend (5. baskı, 1847), (4) A long splice, A. Hyatt Verrill, Knots, Splices and Rope Work (1917), Bölüm V, Şekil 107, MEB MEGEP, Halatlar ve Halat İşleri modülü (2016), s. 44–45, Şekil 3.21–3.25, Hjalmar Öhrvall, Om knutar (2. baskı 1916), s. 167–169.

Turkish names, by who uses them

  • Seafarers: Matiz dikişi

Main Turkish name from seafarers · MEB halat modülü

Sources for the names
Where not to use it
On braided or sheathed rope whose strands cannot be opened; where extra thickness does not matter, the short splice, which needs less rope and work, is the usual choice.
Weakness
It takes a lot of rope and care, and in synthetic rope the strands slip out more easily; Wikipedia rates it a little weaker than the short splice, Verrill stronger.

Similar and alternative knots

Sources and verification

  • The card was written in our own words from Wikipedia and Wikidata data; the tying method has not yet been checked against two sources.