Makes a single thimbled eye at the anchor end of a hemp cable out of two eyes laid side by side, one formed by long-splicing two strands together and the other by eye-splicing the third strand; the eye is then shackled to a chain or the anchor.
About two fathoms back from the end, whip the cable, then open it out into its strands as far as the whipping.
Join two of the three strands to each other with a long splice, so that the bight between them forms an eye as long as the thimble's diameter plus the width of the seizing.
Eye-splice the third strand into its own standing part to make a second eye the same size as the first.
Set the two eyes side by side and spread them with a fid, lay a length of rope into the groove between them as a filler, and cover the whole eye with hitching in small stuff.
Fit an oval thimble into the eye and seize it in place with a round seizing.
Lay the leftover ends of the splices along the cable's lay and serve over them with rope (keckling).
Giving the outboard end of a hemp anchor cable a strong eye with a thimble that can be shackled to a chain or the anchor.
When
Unknown; according to Ashley, Biddlecomb mentions it in 1848, and Wikipedia notes that the name appears in Bushell in 1856.
Who devised it
Unknown; Biddlecomb (1848) names the eye after Admiral Sir George Elliot (Ashley).
Where the name comes from
Biddlecomb's name 'Admiral the Hon. Sir George Elliot's Eye' was shortened over time to 'Elliot's Eye' (Ashley); the sources spell it both Elliot and Elliott.
Its story
Elliott's eye is an eye made from a hemp cable's own strands at its outboard end, the end that goes to the anchor. According to Nares's Seamanship, written for the Royal Navy, hemp cables had a rope-maker's eye at one end and an Elliott's eye at the other; the eyes were formed round large thimbles, two or three links were put in, and the chain was shackled to the last link. Ashley writes that Biddlecomb in 1848 called it 'Admiral the Hon. Sir George Elliot's Eye' and that the name was later shortened to 'Elliot's Eye'. Wikipedia says the name 'Admiral Elliott's Eye' for the splice appears in 1856 in Bushell's The Rigger's Guide; the same name is also the nickname of the loop in a Royal Navy officer's sleeve lace, and one legend ties it to the way an eye was formed in a rope cable. Luce noted in 1866 that the eye was not used on cables in the U.S. service but could be very useful at the ends of large hawsers for towing and mooring.
On braided or jacketed rope that cannot be opened into strands, since the method depends on unlaying a three-strand cable; Luce wrote in 1866 that it was not used for cables in the U.S. service.
Weakness
It is a long job that needs the cable opened for about two fathoms, two separate splices, a filling, a thimble seizing and the ends wormed and served; the two eyes must come out exactly the same size, as Alston and Ashley both stress.