Joins the end of a laid rope by its strands to a ring, for example the ring clew of a yacht sail; after passing through the ring the strands are tapered and tucked back into the rope.
Fastening a rope's end permanently to a ring by splicing, above all to the ring clew of a yacht sail.
When
Unknown; no date appears in the sources. Ashley describes it in 1944.
Who devised it
Unknown; Ashley gives the form he describes under the name of William A. Larson.
Where the name comes from
Because the splice is made to a ring; the sources say nothing more.
Its story
A ring splice uses the strands of a laid rope to fasten its end to a ring. Wikipedia, drawing on Barbara Merry's The Splicing Handbook, describes it as a splice that connects a rope's working end to a ring or to the clew of a sail. In 1944 Clifford Ashley gives one form of it under the name of William A. Larson, used on the ring clews of yacht sails: the strands are first tucked through the ring as his drawing shows, then one after another they are thinned down and spliced back into the rope with seven or eight tucks, and for the final two or three yarns the tucks go through the strand rather than beneath it. Right after it Ashley gives a very similar splice in which the strands are tucked the opposite way and worked over and under as they are thinned, and among the eye splices he shows an eye based on Larson's splice. The chain splice, in which strands go through a ring or a link of chain, he describes under a separate number.
On braided or kernmantle rope whose strands cannot be separated; the method in the sources is for laid rope whose strands can be opened.
Weakness
Each strand has to be thinned and tucked back seven or eight times, which is long, skilled work; the sources say nothing about the strength of the splice.