Slipped becket hitch TR

Hitch · Slipped

Slipped becket hitch

Fastens a line to a fixed, closed eye (a spliced eye, a sewn webbing loop or a metal ring) using the sheet bend's structure; one pull on the tail of the bight releases it, and it is widely used for hanging hammocks.

Easy ABoK 298 Camping and scoutingSailing and boating

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

How to tie it

  1. Have the eye ready (a spliced rope eye, a sewn webbing loop or a metal ring); since it is already closed, you do not need to form a bight.
  2. Bring the working end through the eye from UNDERNEATH, so it comes up out of it.
  3. Take the working end around BEHIND both legs of the eye.
  4. Pass the working end UNDER the standing part of the same rope, but do not pull the end all the way; fold it back and push it through as a bight.
  5. Set the knot by pulling the standing part before any load goes on; to release it, pull the tail of the bight.

The method was checked against: Knots 3D: Becket Hitch (Slipped) (animasyon), The Bear Essentials: How to Tie the Slipped Becket Hitch, Animated Knots: Sheet Bend (Becket Hitch notu).

Origin and story

Why it was needed
Securing a line to a fixed eye in a way that a single pull undoes once the load is off; today mostly to attach a hammock's suspension to the hammock's fixed end loop.
When
Unknown; according to Knots 3D the becket hitch already appears in George Nares' 'Seamanship' of 1860, but the sources give no first record of the slipped form.
Who devised it
Unknown; according to Knots 3D the name 'becket hitch' was given by George Nares.
Where the name comes from
Becket: a closed eye such as the eye of a pulley block, a spliced rope eye or a webbing loop; 'slipped' means the last tuck is a bight that comes free when the tail is pulled. In South America it is locally called the 'hammock knot' (Derek Hansen).

Its story

The becket hitch uses the sheet bend's structure to fasten a line to a fixed, closed eye (a becket): a spliced eye in a rope, a sewn webbing loop or a metal ring. In the slipped form the final tuck is made with a bight instead of the end, so one tug on the tail lets the whole knot fall open. Knots 3D credits the name 'becket hitch' to George Nares, a British naval officer and Arctic explorer, and says the hitch appears in his 'Seamanship' of 1860, a book then considered the leading seamanship textbook for the navy. Derek Hansen, who writes about hammocks, says people have hung hammocks with this hitch since before Columbus, that in South America it is practically the only knot used for the job, and that there it simply goes by the name 'hammock knot'; Knots 3D adds that hammock campers like the slipped form because it is quick to tie and to release.

Source: The Bear Essentials: How to Tie the Slipped Becket Hitch, Wikipedia: Becket hitch, Knots 3D: Becket Hitch (Slipped), The Ultimate Hang (Derek Hansen): The Becket Hitch for Hammocks (2016).

No sourced Turkish name yet.

Where not to use it
In climbing, rescue and any life-safety connection (Bear Essentials asks that even in a hammock it be set before loading and the tails checked); when tying slick line such as Dyneema or Amsteel to an eye of the same material.
Weakness
It can slip in slick or brand-new material; because a pull on the tail of the bight opens the whole knot at once, that tail must not be pulled by accident.

Similar and alternative knots

Sources and verification

  • Wikipedia: Becket hitch
  • The card was written in our own words from Wikipedia and Wikidata data; the tying method has not yet been checked against two sources.