Joins two ropes with a sheet bend whose last tuck is a bight, so a pull on the end releases it at once, even under load; useful for light lines that jam when wet.
EasyNo ABoK numberSailing and boatingCamping and scoutingLoads and everyday jobs
Tying a sheet bend in light lines that jam when wet and still being able to release it with one pull (MEB); joining two lines temporarily so that they can be separated quickly (Knots 3D).
When
Unknown; no date appears in the sources.
Who devised it
Unknown.
Where the name comes from
The English name 'tiller's hitch' goes back to its use for making a boat's tiller fast for a while (Knots 3D); 'slipped' refers to the last tuck being made with a bight.
Its story
The slipped sheet bend is a sheet bend whose last tuck is made with a bight instead of the end: pulling the end draws the bight out and the two ropes come apart. The seamanship module 'Gemici Bağları' of Turkey's Ministry of National Education (MEB) calls it 'Foralı sancak bağı' and presents it as the bend to use when a sheet bend has to be tied in light heaving lines that jam and are hard to cast off once wet with rain. Knots 3D explains its other English name, 'tiller's hitch', by its former use for making a boat's tiller fast for a while, and among its uses lists fastening a line to a tarp's corner loop where it must come off easily.
Where the bend coming undone by itself would be dangerous, and in life-safety work.
Weakness
If the bight snags or the end is pulled by mistake, the bend comes apart at once; this is why NetKnots advises against using it in critical applications.