A form of the becket hitch, which ties a rope to an eye, a block's becket or a hook with the structure of the sheet bend, with an extra turn taken before the working end is tucked back; it holds better in thin or slippery line.
Strengthening the becket hitch with an extra turn so that it does not slip in thin or slippery line.
When
Unknown; Knots 3D places the becket hitch in Nares's 1860 Seamanship, but no date is given for the double form.
Who devised it
Unknown; the becket hitch was named by Admiral George Nares (Knots 3D).
Where the name comes from
A becket is a closed eye; 'double' refers to the extra turn taken before the working end is tucked.
Its story
A becket is a closed eye that a rope is made fast to: a pulley block's eye or hook, an eye at a rope's end and the rope handle of a seaman's chest are all examples. The becket hitch secures a rope to such an eye and is built just like the sheet bend. Knots 3D credits the name to Admiral George Nares, a British Navy officer and Arctic explorer, who described the hitch in his 1860 book Seamanship, then thought to be the leading naval training text. A single becket hitch can slip in thin or slippery line, so one more turn is laid over the first before the working end goes back under itself: Wikipedia calls the result a double becket, while Knots 3D names double or triple becket hitches by how many turns are added. Knots 3D also mentions that the becket hitch is a favourite with hammock campers.
Where a single becket hitch already holds well, as in sheathed rope or webbing, the extra turn is not needed; Knots 3D recommends the extra turns for thin or slippery cord.
Weakness
The extra turn adds grip, but the structure is still that of the sheet bend family: Knots 3D says the double sheet bend, with the same structure, is more reliable than the single but can still slip.