Shroud knot TR

Bend

Shroud knot

Joins two laid ropes by unlaying their ends and making a wall knot on each side; it was used to repair a parted shroud when there was no time to splice, and today it is mostly decorative.

Hard ABoK 1565 Sailing and boatingDecoration and macramé

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

How to tie it

  1. Unlay the strands at the ends of both ropes far enough and separate them.
  2. Push the two ends together as if starting a short splice, so that each rope's strands lie between the other's and the unlaid parts butt against each other.
  3. Using the first rope's strands, wall them round the second rope's standing part, working against its lay: bend each strand down in turn so that it catches the end of the previous one from UNDER it, and bring the last one up from UNDER through the first strand's bight.
  4. Work the knot tight gradually by pulling on each strand in turn, so that the bights lie even and neat.
  5. Turn the ropes over and make an identical wall with the second rope's strands round the first rope's standing part, then tighten it; when the ropes are hauled apart, the two walls jam against each other.
  6. Taper the ends of the strands, lay them along the standing parts, tie them down with small line and, if you like, serve over them.

The method was checked against: R. H. Dana, The Seaman's Friend (5. baskı, 1847), s. 48: A shroud knot (Gutenberg #40958), P. N. Hasluck (ed.), Knotting and Splicing Ropes and Cordage (1907), Fig. 96, s. 73 (Gutenberg #70874), F. Öhrvall, Om knutar (2. baskı, 1916), s. 161–162, fig. 196 (Project Runeberg).

Origin and story

Why it was needed
Mending a shroud or stay that had been shot through or had parted, quickly and with little rope, when there was no time to splice.
When
Unknown; it is described by 1847 at the latest, in Dana's book.
Who devised it
Unknown.
Where the name comes from
It comes from the shrouds that hold a mast from the sides (Wikipedia); in Swedish it is 'vantknop' (Öhrvall).

Its story

The shroud knot joins two laid ropes by unlaying their ends into strands and making a wall knot on each side. Its name comes from the shrouds attached to a sailing ship's mast: Brady's The Kedge-Anchor describes mending a shroud with it after the shroud had been shot or carried away, and Hasluck (1907) a stay or shroud that had parted; Wikipedia says it gave a quick repair that used little rope. Öhrvall (1916) gives the Swedish name 'vantknop'; he says it served to join parted shrouds at once when there was no time to splice, that after splicing it is the strongest way to join two ropes, and that it can join ropes of very different thickness. Wikipedia notes that because ships now mostly use steel cable, the knot is made today mainly for decoration.

Source: R. H. Dana, The Seaman's Friend (5. baskı, 1847), s. 48: A shroud knot (Gutenberg #40958), Wikipedia: Shroud knot, W. N. Brady, The Kedge-Anchor (6. baskı, 1852; ilk baskı 1847), No. 36 (Gutenberg #77729), P. N. Hasluck (ed.), Knotting and Splicing Ropes and Cordage (1907), Fig. 96, s. 73 (Gutenberg #70874), F. Öhrvall, Om knutar (2. baskı, 1916), s. 161–163: Vantknop (Project Runeberg).

No sourced Turkish name yet.

Where not to use it
On braided rope (it needs laid rope whose strands can be opened) and for permanent joins that must be as strong as possible; a full splice is more secure.
Weakness
A full splice holds more securely, and unlaying the strands and securing the ends takes time.

Similar and alternative knots

Sources and verification