In shore fishing, joins a thin main line to the heavy mono leader that stops it breaking when casting heavy leads; the leader carries only a small overhand knot.
Adding a heavy leader to the main line so the thin line does not break when heavy leads are cast from the shore; according to Planet Sea Fishing the leader also stands up to abrasion on rocks, shingle and mud.
When
Unknown; no date appears in the sources. The instructions consulted date from 2009 (Sea Angler) and 2010 (Planet Sea Fishing).
Who devised it
Unknown.
Where the name comes from
A heavy leader that takes the strain of the cast is called a 'shock leader'; Neil Mackellow finds the name misleading, prefers plain 'leader', and calls the connection the 'Grinner and Half Hitch' leader knot.
Its story
In shore sea fishing, the shock leader knot joins a thin main line to the heavy mono leader that is added so the line survives long casts with heavy leads. Sea Angler's 2009 instructions call for a leader of at least 50 lb with a 150 g lead and 60 lb with 170 g, and use just a plain overhand knot in the leader to keep the bulk in the thick line down. Neil Mackellow, a former world champion caster, writing on Planet Sea Fishing in 2010, describes a connection doing the same job as the 'Grinner and Half Hitch' leader knot and calls the word 'shockleader' slightly misleading: besides the shock of the cast, the leader must stand up to rocks, shingle and mud. He passes on the old rule of thumb of 10 lb leader breaking strain per ounce of lead, calling it very loose but a fair guide.
With a braided main line; Planet Sea Fishing gives it for a mono main line, and Sea Angler has a separate article on joining a mono leader to braid.
Weakness
Like any knot it is a possible weak point, and if the coils do not bed down tight and close together they can slip, so it should be wetted and drawn up slowly with steady, even tension rather than jerked.