Joins heavy cable-laid rope, made of three ropes laid together, end to end: the ropes that form the cable's strands are laid in as in a long splice, and then, instead of being tucked, their own strands are long-spliced in turn.
HardABoK 2709, 2710, 2711, 2712, 2714Sailing and boatingLoads and everyday jobs
Joining heavy cable-laid rope end to end; in Ashley's day, repairing broken manila cable in well drilling.
When
Unknown; no date appears in the sources. It is described in Luce's seamanship book of 1866.
Who devised it
Unknown; Ashley (1944) writes that he worked out his own method for drilling cable.
Where the name comes from
Unknown; the sources do not explain where the name comes from.
Its story
The mariner's splice is the name of the long splice that joins heavy cable-laid rope, made by laying three ropes together, end to end. Luce (1866) sums it up like this: the cable is spliced by laying in its strands (each of them a rope in itself) as in a long splice, but instead of being tucked, these ropes are in turn long-spliced among themselves; the splice is then stretched with tackles and the ends trimmed. Luce adds that it is rarely made, because only worn, softened hawsers will take it, and for those he prefers a shroud knot. Riesenberg (1922) gives the same recipe briefly and calls long-splicing a cable-laid rope a real sailor's job. Ashley (1944) found every description he had seen sketchy and vague; at a rope manufacturer's request he worked out an easier method for drilling cable, used it single-handed on a new nine-inch cable, and says that specimen is shown at the Mariners' Museum in Newport News.
On plain three-stranded or braided rope (the method is for cable-laid rope); Luce says it can be put only into worn, soft hawsers, and that even there a shroud knot is the better choice.
Weakness
It is very long, heavy work; Ashley used a marlingspike, blacksmith's tongs and a winch to tuck the strands, and writes that the half knot in Luce's version is hard to draw up and stays bulky in the splice.