Imomushi knot TR

Hitch

Imomushi knot

Ties a leader to a ring, swivel or similar metal fitting: the end is made fast with two passes through the ring and then worked along the standing part in alternating half hitches.

Medium No ABoK number Fishing

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

How to tie it

  1. Pass the leader's working end through the ring, leaving a tail of about 20 cm.
  2. Pass the working end through the ring once more, so two turns lie on the ring and a loop is left around the standing part.
  3. Pull the standing part and the working end together to bed the loop firmly on the ring.
  4. Tie a half hitch with the working end around the standing part and snug it.
  5. Tie the next half hitch from the other side and keep alternating sides, at least six times in all, snugging each one with the standing part held taut.
  6. Trim the spare end.

The method was checked against: TSURI HACK: イモムシノット 手順1–8 (çizimli), TSURINEWS: イモムシノット 結び方 (fotoğraflı, 2022).

Origin and story

Why it was needed
Tying a leader to a metal ring or swivel so that it will not slip in a fight with a big fish and will stand up to chafe.
When
Unknown; no date appears in the sources.
Who devised it
Unknown.
Where the name comes from
From the Japanese word imomushi, 'caterpillar'; the long knot of half hitches is likened to one (TSURINEWS).

Its story

Imomushi is Japanese for 'caterpillar'; in a 2022 TSURINEWS article a boat angler explains that the knot is named for the way its long run of half hitches looks like one. It is used to tie a leader to metal fittings such as rings and swivels when jigging from shore or boat, and TSURI HACK describes it as resistant to chafe on the bottom and suitable for slippery fluorocarbon leaders. The long body of hitches is said to give the leader some protection from sharp-toothed fish such as sawara and hairtail (tachiuo). A LureNews R writer said in 2020 that it had become the knot he used most, partly because it is easy to tie even with thick fluorocarbon leaders.

Source: TSURINEWS: ボート釣り愛好家が教える【最高強度を誇る『イモムシノット』結び方】 (2022), TSURI HACK: 接続金具を結束『イモムシノット』を画像解説, LureNews R: 「イモムシノット」使ってますか? (2020).

No sourced Turkish name yet.

Where not to use it
For joining two lines; this knot is for tying line to a metal fitting.
Weakness
The knot is long; TSURINEWS notes that a snagged jig usually costs the leader and that a thick leader is hard to break free; half hitches that are not snugged one by one lower its strength.

Similar and alternative knots

Sources and verification

  • The card was written in our own words from Wikipedia and Wikidata data; the tying method has not yet been checked against two sources.