Pass the PE through the lure's eye twice and snug it, keeping the two strands in the eye from overlapping, and keep the line wet from here on.
Hold the standing part and the working end and turn the lure to twist the two together a few times.
Push the twists toward the eye and, keeping both strands taut, go on twisting until there are about 30 twists.
As in a Bimini twist, let the working end wrap back over the twists toward the eye, with slightly less tension; the return takes fewer turns than the outward run.
At the eye, put in 5 to 10 more twists under strong tension; the whole knot should turn amber.
Pass the working end through the eye once more and fix it temporarily with a half hitch.
Tie half hitches from both directions around the twisted standing part and close with an end knot.
Trim the spare end and melt its tip into a small knob.
Tying PE line straight to a lure without losing much strength, when the leader has been forgotten or is not wanted.
When
In 2019; it was published on the Magical Hour boat website on 17 July 2019.
Who devised it
The captain of the Magical Hour fishing boat in Hokkaido (Kameda, according to TSURI HACK).
Where the name comes from
Unknown; the sources do not explain it, though the boat that introduced it is called Magical Hour.
Its story
The magical knot was introduced on 17 July 2019 on the website of Magical Hour (マジカルアワー), a fishing boat working out of Toyoura on Funka Bay in Hokkaido, whose captain presents it as a knot of his own design; TSURI HACK gives the captain's name as Kameda. Its purpose is to tie braided PE line straight to a lure or swivel without a leader. The captain describes it as a variation of the hand-tied Bimini twist that needs no tool and can be tied with hands and teeth in any position. In five pull tests by TSURI HACK with size 1 PE the average strength was 86 percent, and the line never slipped.
On very small swivels or a bare welded ring, where both the captain and TSURI HACK say it is hard to tie.
Weakness
If the finishing half hitches come undone the twists unwind and the knot falls apart, which is why the captain melts a knob on the end; in his own tests its strength also varied from one tying to the next.