Triple knit knot TR

Hitch

Triple knit knot

Ties a thick leader to a welded ring, swivel or similar metal fitting, seating three strands side by side on the ring.

Medium No ABoK number Fishing

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

How to tie it

  1. Pass the leader's working end through the ring, leaving a long tail.
  2. Pass it through the ring once more to make two loops side by side on the ring, laid neatly without overlapping.
  3. Take the working end UNDER the standing part and bring it back around it.
  4. Pass the working end through the two loops.
  5. Pull the standing part and the working end in turn, slowly, until three strands sit side by side on the ring.
  6. To reinforce it, tie half hitches with the working end around the standing part, alternating from below and from above, snugging each one.
  7. Trim the spare end.

The method was checked against: TSURI HACK: TNノット 手順1–12 (çizimli), ジギング魂 (Jigging-soul): トリプルニットノット(TNノット)の結び方 (fotoğraflı, 2016).

Origin and story

Why it was needed
Tying a thick leader to a metal ring or swivel so that it will not break in a hard fight with a big fish.
When
Unknown; no date appears in the sources.
Who devised it
Unknown.

Its story

The triple knit knot, often shortened to TN knot in Japanese sources, ties a leader to a metal fitting such as a welded ring or a swivel. TSURI HACK presents it as an established knot for jigging and casting from shore and boat for blue-backed pelagic fish (aomono), and says it is usually reinforced with half hitches rather than used alone. Varivas explains that the line also runs through the loops around the ring, which acts as a cushion and resists breaking; the line maker recommends it for yellowtail amberjack (hiramasa), tuna and GT. In ten pull tests published by Jigging-soul in 2016 the knot, tied without half hitches, averaged 90 percent, and none of the breaks was a slip.

Source: TSURI HACK: 金属パーツを結束『TNノット』を動画・画像解説, Varivas: ノット図鑑 (トリプルニットノット), ジギング魂 (Jigging-soul): トリプルニットノット(TNノット)の結び方と結束強度 (2016).

No sourced Turkish name yet.

Where not to use it
For joining two lines; this knot is for tying line to a metal fitting.
Weakness
TSURI HACK says it is rarely used on its own and is reinforced with half hitches; Yup! names keeping the passes on the ring from overlapping as the main thing to watch.

Similar and alternative knots

Sources and verification

  • The card was written in our own words from Wikipedia and Wikidata data; the tying method has not yet been checked against two sources.