Head earing TR

Lashing

Head earing

Hauls the top corner of a square sail out toward the yardarm and lashes it there, so the head of the sail lies stretched along the yard.

Medium ABoK 3435 Sailing and boating

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

How to tie it

  1. Make the end of the earing fast to the cringle at the sail's upper corner; Nares splices a long eye into the rope for this.
  2. Lead the working end through the head-earing strap on the yardarm and back through the cringle to make the first turn.
  3. Haul on the working end until the sail's head is drawn out along the yard and sits on top of it.
  4. Take the working end OVER the yard, round UNDER it and up through the cringle again; repeat for three or four turns.
  5. Expend the rest of the working end round the first turns (in Nares, round all the parts) and make it fast.

The method was checked against: R. H. Dana Jr., The Seaman's Friend (5. baskı, Boston 1847; 1841'de tescil; Gutenberg #40958), G. S. Nares, Seamanship (3. baskı, 1865; Internet Archive).

Origin and story

Why it was needed
Stretching the upper corners of a square sail out toward the yardarms and lashing them firmly to the yard, so that the head of the sail lies straight and taut along it.
When
Unknown; it was in print by the 1840s, described in the 1847 edition of Dana's handbook (registered in 1841).
Who devised it
Unknown; it is described as standard practice aboard square-rigged ships.
Where the name comes from
Unknown; the sources do not explain the word 'earing'. Dana's glossary defines an earing as a rope fixed to a sail's cringle and used to bend or reef the sail; Ashley also gives the name 'bull earing'.

Its story

Bending a square sail on means hauling its two top corners out toward the ends of the yard, and the short ropes fixed to those corners, the earings, do that work. R. H. Dana Jr.'s The Seaman's Friend, a merchant-service handbook first registered in 1841, lists the strap for this rope as the first fitting to go on a lower yardarm, and it explains how the head earing is passed round the yard when the sail is bent. G. S. Nares's Seamanship (3rd edition, 1865), used aboard the Royal Navy training ship Britannia, states that square sails are secured to their yards by two things: head earings and small ties called robands. S. B. Luce (1866) pictures an earing hauled out to an iron staple in the yard instead of a strap, and doubts the staple is any better. Ashley notes that the same rope was also called the bull earing and was made to taper toward its end by a series of side splices.

Source: R. H. Dana Jr., The Seaman's Friend (5. baskı, Boston 1847; 1841'de tescil; Gutenberg #40958), G. S. Nares, Seamanship (3. baskı, 1865; Internet Archive), S. B. Luce, Seamanship (1866; Internet Archive), C. W. Ashley, The Ashley Book of Knots (1944), #2838 ve #3435.

No sourced Turkish name yet.

Where not to use it
On rigging without a strap at the yardarm or a cringle at the sail's corner; the sources describe the method around those two fittings.
Weakness
It is slow, since each turn is passed and hauled taut by hand; Dana says that with a new sail the head rope should be ridden down on the yard and the earings then hauled taut again.

Similar and alternative knots

Sources and verification

  • The card was written in our own words from Wikipedia and Wikidata data; the tying method has not yet been checked against two sources.