Take one strand out of a rope of suitable size for the cringle and whip both its ends.
Pass the strand through the eyelet hole on the left of the sail so that it takes in the boltrope, leaving one end about a third and the other about two thirds of the length.
Lay the two legs up round each other, following the strand's old lay, with an odd number of lays (usually three; five or seven for a large cringle).
Pass the long end through the eyelet hole on the right, bring it back through the cringle and lay it into the empty groove between the lays, so the cringle closes up as three parts.
Take each end through its own eyelet hole and secure it with a hitch round the boltrope.
Tuck the ends under the strands of the boltrope beside the cringle and haul them taut.
Open the cringle with a fid and, if wanted, fit a thimble; tuck the ends once more, then trim and cut them.
Strong rings along the edge of a sail for the reef, bowline and earing lines to make fast to.
When
Unknown; no date appears in the sources. It is described in the 1827 edition of Lever's book.
Who devised it
Unknown.
Where the name comes from
Smyth (1867) suggests the word comes from the old English 'crencled', meaning ring-shaped; he also records the spelling 'crinkyl'.
Its story
A cringle is a small ring worked into the boltrope of a sail from a single strand of rope, often fitted round a thimble or metal ring. Smyth's dictionary of 1867 says cringles take the lines that haul the sail up to its yard or stretch its leech out with bowline bridles, and suggests the word comes from the old English 'crencled', meaning formed into a ring. The 1827 edition of Lever's book names the earing, bowline and buntline cringles one by one and notes that they are generally worked round thimbles; the 1871 edition of Alston's Seamanship says that reef cringles have thimbles while bowline cringles do not need them. According to Wikipedia a metal grommet inside strengthens it and reduces wear.
With a strand taken from worn rope; Smyth advises making cringles from the strands of new boltrope.
Weakness
A plain rope ring is worn by whatever passes through it; Wikipedia notes that a metal grommet is usually fitted inside to strengthen it and reduce wear.