When reefing a square sail, hauls the reef cringle out towards the yardarm and lashes it firmly there; the outer turns stretch the head of the reefed sail and the inner turns take the load.
Hauling the reef cringle out along the yard when reefing and lashing it to the yard, so that the head of the reefed sail stays taut and the strain of the leech is held.
When
Unknown; Brady describes it in 1847.
Who devised it
Unknown.
Where the name comes from
The sources do not explain the name; an earing is a rope that secures one of a sail's cringles to its yard (Nares).
Its story
When a square sail was reefed, its reef cringle was hauled out towards the yardarm and lashed there with a rope; that rope, and the way it is passed, is called a reef earing. Knight (1901) describes these ropes as manila spliced into the lower hole of the cringle, which draw the cringle upward and outward along the yard and keep it in place. Brady (1847) gives the number of outer turns for each reef (two at the first reef, three at the second and at the third, four at the fourth), and Luce (third edition, 1868) explains that the outer turns serve only to stretch the sail's head, while the full load of the leech falls on the inner turns. Nares (1877) covers the same work in question-and-answer form and notes that one of the usual methods always slips down under load.
For lashing the sail's head cringles to the yardarm; a separate passing, the head earing, is described for that job.
Weakness
Nares (1877) warns that the customary method for the third and fourth reefs always slips down once the sail is under real strain; he notes the sail stays up better when the first inner turn goes round the yardarm alone, and adds that a strop with a hide-covered thimble at the yardarm is sometimes fitted.