Continuous lashing TR

Lashing

Continuous lashing

Binds a row of thin slats or small poles to a support pole one after another to make a table top, seat or shelf, using both halves of a single rope that starts with a clove hitch at its middle.

Medium No ABoK number Camping and scouting

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

How to tie it

  1. Before you start, make sure the two support poles lie level and parallel, spaced so that each slat reaches across both of them.
  2. Find and mark the middle of the rope and tie the rope to the support pole at that middle with a clove hitch, leaving two halves of equal length.
  3. Lay the first slat on the support pole right next to the clove hitch and take both halves of the rope together OVER it.
  4. Bring both halves down UNDER the support pole and cross them over each other there so they swap sides.
  5. Bring the halves back up, slide the next slat into place and take both halves OVER this slat as well.
  6. Repeat the same sequence at every slat: over the slat, crossed under the pole, back up again.
  7. After the last slat, join the ends of the two halves with a reef knot (square knot).

The method was checked against: Girl Scouts of California's Central Coast: Lashing Manual (2016), s. 10, Continuous Lashing, Pathfinder Wiki: AY Honors/Lashing/Continuous.

Origin and story

Why it was needed
To fasten thin slats or small poles to support poles one after another with a single rope, making a flat surface such as a table, seat, shelf or platform; the Girl Scouts manual presents it as the final stage of making a table top or deck.
When
Unknown; no date appears in the sources.
Who devised it
Unknown.

Its story

Say you have built the frame of a camp table by lashing two heavy poles to its legs, and now you want to lay thin slats side by side across them to make a flat top. There are no nails, and tying a separate lashing at every slat would take far too long. You tie the middle of a long rope to the support pole and hold its two halves in your hands like reins; while a friend slides the slats into place one at a time, you take both halves over each slat and cross them under the pole, and the top settles along the pole as if woven from one end to the other.

Source: Girl Scouts of California's Central Coast: Lashing Manual (2016), s. 10, Continuous Lashing, Pathfinder Wiki: AY Honors/Lashing/Continuous.

No sourced Turkish name yet.

Where not to use it
At the frame joints where heavier poles meet; use a square, diagonal or shear lashing there, since this lashing only holds the slats of the surface.
Weakness
It needs a very long rope (four to six times the length to be lashed) and takes several people: the Girl Scouts manual uses three people, two lashing the support poles while the third slides the slats in and keeps them even.

Similar and alternative knots

Sources and verification

  • The card was written in our own words from Wikipedia and Wikidata data; the tying method has not yet been checked against two sources.