Holds a tackle block on a spar or mast: turns go round the spar, the middle ones pass through the opening of the block's hook or shackle, more turns are laid round the spar higher up, and a square knot joins the ends.
Holding a tackle block on a spar or mast; carrying the butt of the boom on a gin pole.
When
Unknown; no date appears in the sources. It is described in the U.S. Army manual FM 5-125 of 1995.
Who devised it
Unknown.
Where the name comes from
The name says what it does: lashing a block to a spar.
Its story
The U.S. Army rigging manual FM 5-125 (1995) offers the block lashing for holding a tackle block on a spar: a few turns are first laid round the spar, the following turns go through the opening of the block's hook or shackle and are hauled tight, further turns are added higher up, beyond the hook, and a square knot joins the two ends. The same manual uses it on a gin pole: a block lashing put on just above cleats spiked to the mast carries the butt of the boom, and the sling that cradles the boom runs through the middle turns of that lashing. Ashley (1944) mentions a different arrangement under the same name: in an arrangement he credits to Knight for fixing a block to a derrick arm, cleats go on the arm and the strap's eye is secured to it with figure-of-eight (racking) turns.
It should not be rigged by untrained hands where it holds a person or lifts a heavy load nobody has calculated; such work needs supervision by someone who knows rigging and suitable gear.
Weakness
The turns can creep along the spar (the army manual tells riggers to nail wooden cleats beside lashings that hold blocks on a pole so they cannot slide); how strong it is depends on the rope, how many turns are taken and how hard they are pulled, and reading about it is no substitute for hands-on training.