Cut a length of rope to suit the groove (score) round the block's shell, Wilson-Barker suggests 1.5 times that measurement, and short-splice the ends into a ring; a grommet laid up from a single strand also works.
If you like, protect the ring first by worming, parcelling and serving it.
Seat the block in one bight of the ring, in the groove of its shell, with any splice sitting under the block, and make sure the block goes in facing the right way.
Put a thimble into the other bight of the ring.
Draw the two parts of rope between block and thimble together with a Spanish windlass and keep the strop taut (Wilson-Barker reeves a line through the block and makes the thimble end fast to something for this).
Clap a seizing on between the thimble and the top (crown) of the block, heaving each turn taut on its own with a heaver, then cross the turns and knot the ends.
Hanging a block from a mast, yard, piece of rigging or another rope by giving it an eye with a thimble.
When
Unknown; Smyth defines it in 1867, and Hasluck (1907), Wilson-Barker (1909) and the Admiralty manual (1915) describe how it is made.
Who devised it
Unknown.
Where the name comes from
Smyth gives the word as 'strop, or strap'; the sources do not explain where it comes from.
Its story
Ship's blocks were once fitted with a ring of rope called a strop. According to Smyth's dictionary of 1867, a strop is a length of rope, usually spliced into a ring, that wraps round a block's shell so that the block can be hung wherever it is wanted on the masts, yards or rigging. Hasluck (1907) finds a grommet neat for the job and a selvagee neater still; Wilson-Barker, writing in 1909, has the rope cut to 1.5 times the block's girth measured in its groove. The same author notes that blocks were by then being made with internal iron straps or entirely of iron, so rope-stropped blocks had largely fallen out of use. The Admiralty manual, reprinted in 1915, says that every block in the service was stropped with wire rope and describes single and double strops.
On blocks bound with internal iron straps or made wholly of iron; Wilson-Barker wrote in 1909 that rope-stropped blocks had largely gone out of use for that reason.
Weakness
It leaves little room for error: the ring has to be cut to the right length for the block's groove (Wilson-Barker gives one and a half times its girth) and the block put in facing the right way, which Wilson-Barker specifically warns about.