A directional friction hitch used by arborists: a split-tail cord with an eye at each end is wrapped round the climbing line and clipped with a carabiner, letting the climber move up and down the rope.
HardNo ABoK numberTree work
Life safety: This knot is used in climbing, rescue or tree work. This app does not replace hands-on training; for life-safety work, practise under an instructor.
Giving an arborist a grip on the climbing line that clips on with a carabiner, holds under load and can still be released and slid by hand, so the climber can move up and down the rope.
When
Unknown; no date appears in the sources.
Who devised it
Unknown.
Where the name comes from
'Tresse' is French for braid, describing the braided part of the hitch below the turns.
Its story
Arborists use the Valdotain tresse, or VT, on their climbing line as a friction hitch that grips in one direction only. It is tied with a split-tail cord, a cord with a sewn or spliced eye at each end; the two eyes are clipped together with a carabiner, and the climber uses it to move up or down the rope. A few turns grip the main rope at the top, with the two ends braided beneath them; the word 'tresse' in the name means braid in French. It is also called the Valdostano, and Wikipedia describes it as the single-cord counterpart of the Machard tresse, which is tied with a closed loop of cord.
Without a suitable split-tail cord and hands-on training; it should not go into a system that holds a person before the cord's type, length and diameter have been tried out.
Weakness
Its grip depends heavily on the cord's type, length and diameter; a cord that is too long may not bite at once when loaded, and it holds in one direction only.