Joins two heavy ropes with a bowline at the end of each rope whose loop goes around the other rope's standing part; the standing parts lie side by side without crossing and share the load equally, and it unties easily once the load is off.
Joining heavy, stiff ropes so that their standing parts lie side by side, without the wear of the bowline bend, whose two loops grind together at a sharp crossing.
When
Unknown; Ashley records it as ABoK #1454 (Knots 3D).
Who devised it
Unknown; Ashley names no inventor. Nic Compton coined the name Yin-Yang Bowline (Knots 3D).
Where the name comes from
Knots 3D calls it the 'twinned' form built from two symmetric bowlines; Nic Compton named it Yin-Yang after the Chinese idea of complementary opposing forces, which its layout recalls.
Its story
The twin bowline bend is made by tying a bowline in the end of each of two ropes so that each loop goes around the other rope's standing part; the two ropes do not cross in the join but lie side by side. According to Knots 3D, Ashley records this twinned form as number 1454 in his book, just before the bowline bend made of two interlocking bowlines (#1455), and names no inventor. The same source says Nic Compton gave it the name Yin-Yang Bowline in The Knot Bible and suggested tying it in one black and one white rope. It is recommended for heavy rope such as hawsers, towlines and large cables; because it has no crossing point where the loops rub on each other, as the bowline bend does, it is preferred for joins that will stay loaded for a long time.
Where there is little rope to spare; the ends must be left generously long and it uses more rope than linking two loops.
Weakness
Getting the legs of the two bowlines to equal length is difficult; its security is that of an ordinary bowline, and some sources use the name 'twin bowline bend' for the interlocking bowline bend as well.