Joins two ropes of the same or different thickness so that, even in slippery synthetic rope, the join does not loosen under intermittent or jerking loads; small tying mistakes do not spoil it.
Wind the working end of the first rope loosely twice around your index finger and slip the turns off; the working end should lie alongside its own standing part next to the double loop.
Pass the working end of the second rope through both turns, heading the same way as the first rope's standing part.
Wrap the second rope's working end twice around the first rope's working end and standing part together, working away from the double loop.
Bring the working end back and pass it through the first rope's two turns in the opposite direction, so it comes out beside its own standing part.
Pull the two standing parts firmly to tighten; the knot settles into its compact final form on its own.
A bend that does not loosen or slip under intermittent or jerking loads even in slippery synthetic rope, that is easy to learn and that tolerates small tying mistakes.
When
2006: Dick Clements published it in issue 92 of Knotting Matters (September 2006); the Simple Simon it builds on had been published in 1989.
Who devised it
Dick Clements; Harry Asher introduced the Simple Simon family.
Where the name comes from
The symmetric form of the Simple Simon; Clements suggested SSS or Triple-S as a short name. Asher introduced the knot under the name Simple Simon.
Its story
Dr Harry Asher introduced the Simple Simon family as a new knot in The Alternative Knot Book in 1989; as Wikipedia reports, he looked for new bends by taking the two halves of the sheet bend separately and putting them back together. Dick Clements published the symmetric form in issue 92 of Knotting Matters, the IGKT magazine, in September 2006, saying he had not seen it published before, and suggested SSS or perhaps Triple-S as a short name. Clements drew four symmetric versions and, after trials with slippery 4 mm braided nylon and 15 mm three-strand terylene, judged the one with the working ends leaving on opposite sides the best. In his view it is more secure than any plain Simple Simon, and the small slips a tier is likely to make do little to weaken it.