Joins two ropes of different thickness so that the join holds even in slippery synthetic rope; it holds better than the Simple Simon with a single wrap.
A bend more secure than the sheet bend and the single-wrap Simple Simon, holding in slippery synthetic rope and in ropes of different thickness.
When
Unknown; the Simple Simon was published in 1989. In 2006 Clements says the double form appears in books by Budworth and Hopkins, while Knots 3D links the Double Simon Over to Asher's 1989 book.
Who devised it
Unknown; Harry Asher devised the Simple Simon family, and the sources disagree on where the double form came from.
Where the name comes from
The double-wrap form of the Simple Simon; 'over' says the working end crosses over its own standing part on its last pass.
Its story
Dr Harry Asher, a research scientist in retirement, devised the Simple Simon bends and published them in his 1989 Alternative Knot Book; looking for new bends, Asher split the sheet bend into its two halves, an open bight and a single hitch, and tried new ways of putting them together. In the September 2006 issue of Knotting Matters, the IGKT magazine, Dick Clements notes that Geoffrey Budworth and Richard Hopkins each include a version named the Double Simple Simon, where the second rope wraps the two legs of the bight one extra time; the point is a bend that holds better still than the ordinary Simple Simon. Knots 3D splits the double form into 'Over' and 'Under'; in the Over form the working end crosses OVER its own standing part on its last pass. According to Knots 3D, the Double Simon Over is more secure than both single-wrap Simple Simons but slightly less secure than the Double Simon Under.
Where the very best grip is needed in very slippery rope; Knots 3D recommends the Double Simon Under for that.
Weakness
It takes more wrapping than the single Simple Simon, and Knots 3D rates it a little less secure than the Double Simon Under; the sources give no measured strength.