Joins two heavy ropes with a flat, symmetrical bend with gentle curves; because its outer loops lock as single hitches it also grips ropes of unequal size or make, and either end can be lifted to loosen it.
Reinmann reached this form while working further on the first symmetric bend; because its outside loops close as single hitches, he judged it better than the first for joining ropes of unequal size or make.
When
1993: published in issue 43 of Knotting Matters.
Who devised it
Jack Reinmann (Ohio, USA).
Where the name comes from
SHB #2 (Symmetric Hawser Bend #2) in Reinmann's naming; the names 'Under' and 'Symmetric Hawser Bend II' appear in Knots 3D.
Its story
This bend is the later of the two symmetric hawser bends that Jack Reinmann of Ohio published in issue 43 of Knotting Matters in 1993 (SHB #2). Reinmann first found the symmetric form by changing the final tuck of Ashley's Hawser Bend (ABoK #1450); further tinkering with it led him to this second form, which he thought would prove more valuable in time. The key difference lies in the outside loops: each one is locked as a single hitch, its end trapped beneath its own standing part, a structure Reinmann regarded as the heart of long-proven knots like the bowline and sheet bend. In his trial he joined 3/16 inch (about 5 mm) smooth braided dacron to 1/2 inch (about 13 mm) three-strand nylon: the first form and Ashley's knot let the thin line slip straight out under load, while this one, carefully drawn up, held without slipping.
On ropes of greatly different thickness and where a tested strength rating is needed; Reinmann does not recommend joining extremely mismatched ropes and wrote that the knot must be thoroughly tested.
Weakness
It has been tried only in its author's own tests and the sources give no strength figures; it has to be drawn up carefully to hold well.