Slipped constrictor knot TR
Slipped constrictor knot, tied and tightened

Binding · Slipped

Slipped constrictor knot

Binds a bag mouth, hose or bundle very tightly like a constrictor; because the last tuck is made with a bight, it can be released by pulling the tail.

Medium ABoK 1250 Loads and everyday jobsCamping and scouting

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

How to tie it

  1. Take the working end OVER the post and bring it back BEHIND (UNDER) it.
  2. Bring the working end across the standing part, going OVER it: this is the riding turn.
  3. Make a second turn in the same direction: OVER the post and back UNDER it.
  4. Lead the working end across the standing part, OVER it, so that it comes alongside the first turn.
  5. Fold the working end back into a bight and tuck the bight UNDER first the standing part and then the riding turn; the bight and both ends should come out between the two turns.
  6. Pull the standing part and the bight to tighten; to release it, pull the tail.

The method was checked against: Wikipedia: Constrictor knot § Slipped constrictor knot, NetKnots: Slipped Constrictor Knot (dört adımlı çizim ve metin).

Origin and story

Why it was needed
Being able to use the tight grip of the constrictor for temporary bindings that will have to be untied.
When
Unknown; the constrictor is clearly described by Öhrvall in 1916 and was named by Ashley in 1944; the sources do not say when the slipped form appeared.
Who devised it
Unknown.
Where the name comes from
Ashley named the constrictor; 'slipped' means that the last tuck is made with a bight.

Its story

The hard grip that makes the constrictor such a good binding knot also makes it very hard to undo once pulled tight, and people often end up cutting it free (Wikipedia, NetKnots). Ashley gave it this name in 1944; under the Swedish name 'timmerknut' the knot is clearly described in Öhrvall's book in 1916 (Wikipedia). The slipped form makes the last tuck with a bight instead of the end, so the same tight grip can also be used for short-term jobs such as a bag that will be opened again, a hose clamped during a repair or a bundle of firewood (Knots 3D, NetKnots). Wikipedia still warns that, depending on the material and how hard it has been pulled, even the slipped version may resist being released.

Source: Wikipedia: Constrictor knot, Knots 3D: Slipped Constrictor Knot, NetKnots: Slipped Constrictor Knot.

No sourced Turkish name yet.

Where not to use it
For permanent or semi-permanent binding (the plain constrictor is more secure there) and on objects that its hard bite could damage.
Weakness
Depending on the material and how hard it has been pulled, even the slipped form may still be very hard to undo; it works best on round objects, and on square-edged ones the knot has to be placed with care.

Similar and alternative knots

Sources and verification

  • Wikipedia: Constrictor knot
  • The card was written in our own words from Wikipedia and Wikidata data; the tying method has not yet been checked against two sources.