Holding the two side packs on top of the saddle for the time being, until the actual hitch is thrown with the lash rope.
When
Unknown; described by 1914 at the latest, in Post's book, and the name 'single-tie sling' appears in FM 25-7 of 1944.
Who devised it
Unknown.
Where the name comes from
The sources do not explain it; this sling is closed with a single knot, while the double-tie sling has two separate knots, front and rear.
Its story
The single-tie sling is the ordinary sling that holds the two side packs on a pack saddle with a single knot while the lash rope is thrown. The 1917 manual of Henry W. Daly, chief packer of the U.S. Army, describes it under the heading of slinging the load and tying the square knot, and asks that the bight sit on the bulge of the pack, neither higher nor lower, because otherwise the rope cannot grip the load. Charles Johnson Post's Horse Packing (1914) describes the same sling for two packers and adds that the whole job can also be done by one man. The name 'single-tie sling' appears in the Army field manual FM 25-7 of 1944, as one of the three slings it counts most practicable; Colonel Albert E. Phillips, inventor of the Phillips pack saddle, wrote in 1931 that he preferred to sling loads with a double tie rather than a single tie.
It is not meant to hold a load on the trail by itself (a lash rope hitch goes over it); long packs call for the double-tie sling and a top load for the cross sling.
Weakness
A bight riding higher or lower than the bulge of the pack cannot grip it (box loads excepted), and packs of unequal weight cause trouble on the trail.