Once the load is on the saddle, pass the lash cinch (a ring at one end, a hook at the other) under the animal's belly.
Tie the long rope securely to the ring, pass it through the ring once more, throw it over the load and put the resulting bight on the hook on the far side.
Twist the doubled rope on top of the load at least twice; push one twist to the right and the other to the left, and take in the slack.
On the right side take the end up from under the rear of the load, pass it under the rear rope between the two twists in the middle and throw it to the far side.
On the far side take the rope round under the load to form the diamond in the middle; keep the rope taut, tighten in turn and tie off the end.
It became widespread around the gold rush of 1848–49.
Who devised it
Unknown; according to Daly it developed from the 'crosstree hitch' that Hudson's Bay Company trappers taught to the Indians of the Northwest.
Where the name comes from
From the diamond shape the rope forms on top of the load.
Its story
The diamond hitch is used to lash a load to a pack saddle. According to the 1917 manual of H. W. Daly, chief packer of the US Army, it developed from the 'crosstree hitch' that Hudson's Bay Company trappers taught to the Indians of the Northwest; the same hitch was known from region to region as the 'sheepherder's' or 'prospector's hitch'. Daly reports that the familiar diamond hitch became widespread around the gold rush of 1848–49, although some old packers credited it to the Mexicans of California. The hitch takes its name from the diamond shape the rope forms on top of the load.