A safer form of the sheepshank, which shortens a rope without cutting it, in which the bights are held at the ends by loops that close when pulled (marlinespike hitches) instead of half hitches.
MediumNo ABoK numberSailing and boatingLoads and everyday jobs
When shortening a rope without cutting it, holding the sheepshank more securely than half hitches can.
When
Unknown; Hasluck describes it in 1907 and Verrill in 1917.
Who devised it
Unknown.
Where the name comes from
It is named for the marlinespike hitch (Hasluck) or running knot (Verrill) used at the ends instead of the half hitch; Hasluck gives it under the heading 'knotted sheepshanks'.
Its story
In the sheepshank, the bight at each end is held by a half hitch, and it readily comes apart once the load is off (Wikipedia). In one of his versions Hasluck (1907) replaces each half hitch with a marlinespike hitch and passes the bight through it; he introduces that hitch as a way to haul the small stuff tight while serving a rope, and says it is practically the same as the running knot. Verrill (1917) shows the same structure: a running knot is tied first and the bight is pushed through its loop, and he calls this the best and safest form of sheepshank. Wikipedia, citing Ashley, also names it among the safest sheepshank variations.
In life-safety work and on slippery synthetic rope: Wikipedia says the sheepshank can come apart under load in such rope and advises using another knot.
Weakness
The loops at the ends hold by being pulled down tight on the bights; the sources rate it among the safest sheepshanks but give no measure of its strength.