Makes an eye, usually through a ring, by turning the end of the rope back on its own standing part with a half hitch and seizing it; the working end lies on top, away from the bight, so it does not jam and can be slipped quickly.
Making large ropes such as hawsers fast to an anchor ring quickly; in the outside form, keeping the end from jamming so that it can be slipped at once.
When
Unknown; 'clinch' appears in the sea dictionaries of R. H. Dana (1841) and W. H. Smyth (1867), and the split into inside and outside clinch is described by Jutsum (1914).
Who devised it
Unknown.
Where the name comes from
The sources do not explain where 'clinch' as a knot name comes from; according to Jutsum, 'outside' refers to the working end being brought round on top, away from the bight.
Its story
The clinch is an old seaman's way of making large ropes fast to a ring: the end of the rope is turned back on its own standing part with a half hitch and lashed to it with a seizing (tight turns of small line). According to W. H. Smyth's dictionary of sea terms, published in 1867, hawsers were bent in haste to the rings of small anchors this way, and guns' breechings were secured the same way to ringbolts in the ship's side. In 1914 Jutsum separates the inside and the outside clinch: in the outside clinch the working end is laid over the top, on the side away from the bight, so that it cannot jam and can be cast loose instantly, for example on cable ends.
Where there is no seizing stuff or no time to put on a seizing; without the seizing it is only a half hitch, and the sources always describe it seized.
Weakness
Its hold depends on the seizing; if the seizing slackens or rots, the eye comes open.