Take a bight in the rope near the working end and pass it through the ring.
Bring the bight down without threading the standing part and the working end through it, so its two sides lie to the left and right of those two parts.
Push a wooden pin through the bight so that it passes BEHIND both parts and its ends stick out beyond the two sides of the bight.
The hitch holds as long as the pin stays in; to cast off, pull the pin and the bight slips out of the ring by itself.
Mooring a small boat to a ring and being able to cast it off in an instant by pulling the pin; according to Burgess, the simple boat knot sometimes caught on the ring.
When
Unknown; it is described in J. T. Burgess's book of 1884.
Who devised it
Unknown.
Where the name comes from
The sources do not explain the name. Hasluck also calls it the 'double boat knot': the doubled form of the boat knot, made with a bight where the boat knot uses only the end. Hasluck and Aldridge describe it as a close relative of the lark's head (cow hitch); Verrill calls the same structure a 'lark's head with toggle'.
Its story
The lark boat knot is held by a wooden pin and is used to moor a small boat to a ring so that it can be let go in an instant. J. T. Burgess lists it in 1884 among mooring and ring knots: because the simple boat knot sometimes catches on the ring, sailors prefer this pinned knot, and pulling the pin frees the boat at once. Hasluck also calls it the 'double boat knot' in 1907; unlike the boat knot, it is made by passing a bight rather than the bare end through the ring, and Hasluck rates it the better of the two. In 1917 Verrill draws the same structure as a 'lark's head with toggle' and recommends it for tying up a boat that may need to be released quickly.