Ties a rope to a post, pile or branch; it holds very securely under load, and when tied slipped a single tug on the working end towards the load undoes it, so the rope can be recovered from below.
MediumABoK 398, 1809Sailing and boatingLoads and everyday jobs
A hitch that holds firmly on a post, pile or branch yet can be let go from below by a single tug on its slipped end; according to The Bear Essentials, especially for mooring a boat to a pile that the tide leaves out of reach.
When
By 1944 at the latest: in The Ashley Book of Knots as numbers 398 and 1809.
Who devised it
Unknown; Clifford Ashley recorded it.
Where the name comes from
According to The Bear Essentials, Ashley gave the name at number 1809 for tying to a post that stands out of reach; Wikipedia also gives the name high post hitch.
Its story
The highpoint hitch, also called the high post hitch, appears twice in Ashley's 1944 book, as numbers 398 and 1809. According to Wikipedia it is very secure, because load squeezes the turns against one another and makes them clamp the working end harder; tied slipped, a single tug on the working end, towards the load, undoes it entirely, even after it has held a heavy strain. Its first moves match those of the slipped buntline hitch; only the last turn is different. According to The Bear Essentials, Ashley first gives it without a name at number 398, among slipped hitches with which climbers let themselves down a rope and then retrieved it from below, and names it at number 1809 in the boating chapter, for mooring to a post or pile that the tide leaves out of reach. The hitch can be tied at your own height and slid up the post by pulling on the rope.
Wherever an accidental release from a snagged or tugged end would endanger people or gear; The Bear Essentials also warns against it where the rope may go slack or the post is slippery.
Weakness
Its grip depends on tension: if the rope goes slack or the post is slippery it can slip, and if the slipped end catches on something and is pulled, the knot spills.