Ties a rope to a ring, eye or post with a buntline hitch that does not shake loose; because the last tuck is made with a bight, it comes undone when the tail is pulled.
MediumABoK 397Sailing and boatingLoads and everyday jobs
Making the buntline hitch, which jams under load, releasable with a single pull; using it where a secure but temporary hitch is needed.
When
Unknown; the buntline hitch dates from the age of sail, but the sources do not say when the slipped form appeared.
Who devised it
Unknown.
Where the name comes from
'Buntline' is the name of the lines it fastened to the foot of the sail in the age of sail; 'slipped' means that the last tuck is made with a bight. Knots 3D also calls it the quick release buntline.
Its story
The buntline hitch goes back to the age of sail: on square-rigged ships it held the buntlines to the bottom edge of the sail, and the flogging of the sail only made it tighter instead of working it loose (Wikipedia). The flip side is that it jams under heavy load and is hard to untie, so when a secure but temporary hitch is wanted it is often tied slipped (Wikipedia, Knots 3D). In the slipped form the last tuck is made with a bight rather than the end; NetKnots says the knot holds under load and lets go at once when the free end is pulled firmly. Wikipedia gives an example of use: a line is tied off with a slipped buntline on one side of a car's roof rack and tightened with a trucker's hitch on the other side.
For a permanent fastening, and where the tail could snag and be pulled: pulling the tail undoes the knot.
Weakness
If the tail catches on something the knot can open unintentionally; if the turns do not progress towards the object, the weaker two half hitches result.