A light seizing that binds two ropes, or two parts of one rope, with a single layer of turns; it starts like a round seizing but has no riding turns on top.
Splice a small eye into one end of the seizing line and lay the two parts of rope to be seized side by side.
Take the seizing line UNDER both parts and pass its other end through the eye.
Wind several turns side by side, depending on the size of the rope (Luce gives six, eight or ten, the Admiralty manual seven).
Bring the end back through the inside of the turns, up through the eye, and heave each turn taut in turn.
Put on no riding turns (no second layer); the seizing stays one layer deep.
Finish by securing the end: Luce ties a reef knot straight away, while Nares' drawing and the Admiralty manual first take crossing turns round the seizing between the two parts and then make the end fast.
Holding two parts of rope together with a light seizing; Nares and the Admiralty manual present it as such.
When
Unknown; Smyth defines it in 1867, and the third edition of Luce (1868) explains how it is put on.
Who devised it
Unknown.
Where the name comes from
The sources do not explain the name; all of them define it as a seizing without riding turns.
Its story
A flat seizing is a light seizing that holds two parts of rope together with a single layer of turns. Luce's Seamanship, compiled for the U.S. Naval Academy (third edition, 1868), sums up the difference briefly: a round seizing has crossing turns, while a flat one goes without riding turns, and Alston's Seamanship of 1871, written for junior naval officers, repeats the same description. Smyth's dictionary of 1867 likewise describes it as a seizing passed like a round seizing but without riding turns. Nares (1877) and the Admiralty manual (1915) both call it a light seizing, and Nares includes a drawing of it.
On heavily loaded or critical connections; Nares and the Admiralty manual present it only as a light seizing, and Wikipedia advises against seizings for heavy, critical loads.
Weakness
With no riding turns over it, everything rests on one layer of turns and the finishing knot; Wikipedia notes that a seizing can slip as the rope under it thins out under strain.