Joins two ropes end to end for abseiling; because the knot sits to one side of the line of pull, it rolls over rock edges more easily when the ropes are pulled down, and it has been found to hold better than the single offset overhand bend (EDK) (Prattley, Chisnall).
EasyNo ABoK numberClimbing
Life safety: This knot is used in climbing, rescue or tree work. This app does not replace hands-on training; for life-safety work, practise under an instructor.
Joining two ropes that will be pulled down and retrieved after an abseil with a knot that holds better than the single offset overhand bend (EDK) but, being offset, still rolls easily over rock edges.
When
Unknown; no date appears in the sources. Prattley included it as an abseil-rope bend in his comparison of 2016.
Who devised it
Unknown.
Where the name comes from
The name comes from tying the double overhand knot with two ropes as an offset (side) bend; Wikipedia explains 'offset' as the knot body sitting to one side of the line of pull and, citing Gommers, regards the terms 'flat' and 'one-sided' as incorrect.
Its story
This bend is made by holding the ends of two ropes side by side and tying a double overhand knot with the pair treated as one strand; Wikipedia presents it as the two-rope version of the double overhand knot, ABoK #516. Because the single-wrap offset overhand bend (EDK) used to join two abseil ropes can capsize under high loads, this is one of the alternatives recommended in its place. Wikipedia traces the name 'double overhand' for this knot to a 2016 comparison by Grant Prattley of Over The Edge Rescue, and the name 'flat doubled overhand bend' to Prattley's 2020 update. In a 2020 review in the International Journal of Mountaineering and Climbing, Robert Chisnall lists the same knot as the 'Double Overhand Side Bend' among the more secure side bends and notes that it did well in Prattley's 2016 tests.
In life-safety connections that will take high loads (the sources assess it only for joining abseil ropes), or with short tails (Wikipedia says tails on offset bends should never be under 200 mm).
Weakness
It is twice the bulk of the single overhand bend, stands further off the rock and may be more likely to snag in cracks (Chisnall); the name 'double overhand' is also given to two overhand knots tied one behind the other, so the two are easily confused. This does not replace hands-on training.