Joins two lengths of rope with a short splice, tapers the long-left ends, worms them into the lay and holds them with seizings; according to Luce it was made so that the splice could be drawn and the lengths separated again when needed.
To join lengths of hemp anchor cable so that the splice could be drawn and the lengths separated again when needed.
When
Unknown; Luce's Seamanship (the archive.org copy is the 1877 printing) places it in an earlier period, when anchor cables were commonly made of hemp.
Who devised it
Unknown.
Where the name comes from
Unknown; Luce does not explain the name, he only says the splice was used so that it might be drawn.
Its story
The drawing splice is described in Stephen B. Luce's Seamanship, compiled for the U.S. Naval Academy, as a splice from the days when anchor cables were made of hemp. According to Luce its purpose was to let the splice be drawn when needed, so the lengths of cable could be separated again. A short splice is made first; its long ends are thinned down to a neat point, laid into the grooves of the rope, and held by sound seizings spaced along it. In the same passage Luce mentions the tapered splice from that period too, in which the strands were reduced little by little and the whole join was covered with spun-yarn service.
Where the join never needs to be taken apart; Luce mentions it only for hemp anchor cables whose lengths had to be separable.
Weakness
Its hold depends on the short splice and the seizings over the ends; Luce says nothing about its strength and gives the method in only a few sentences.