Shortens a rope by turning its spare length into an ornamental chain made by passing the working end through the previous loop, alternately from right and left.
MediumNo ABoK numberDecoration and macraméLoads and everyday jobs
Where the shortening is to start, take the working end once around the standing part to make a loop.
Pass the working end through this loop without pulling it all the way, leaving a new loop on the other side.
Bring the working end back and pass it through this new loop; this makes another loop on the first side.
Keep passing the working end through the previous loop, alternately from right and left, until the chain is as long as you need.
Finish by passing the working end through the last loop and pulling it, or, if you prefer, by knotting the end around its own part with an overhand knot.
Shortening a rope without cutting it, in a chain that looks good.
When
Unknown; Hasluck describes it in 1907, Jutsum in 1914 and Verrill in 1917.
Who devised it
Unknown.
Where the name comes from
Hasluck and Jutsum call it the double chain; Verrill calls the same knot the open chain and gives the name double chain to a different, plait-like shortening (the twist).
Its story
Among the shortenings Hasluck (1907) gives for removing spare length from a rope, he calls the double chain knot perhaps the most ornamental. Jutsum (1914) rates it slightly more involved than the plain chain knot; Verrill (1917) draws the same knot under the name 'open chain' and presents it as a highly ornamental shortening. The structure is the same in all three books: starting from a first loop made around the standing part, the working end is passed each time through the previous loop, alternately from the right and the left, and the rope becomes a chain of loops side by side.