Fold the length to be shortened twice so that three parts lie side by side, with a bight at each end.
Hold all three parts together in both hands, close to the bights at the ends.
Treat the three parts as a single rope and tie an overhand knot with them; one end of the rope has to be free, because it is drawn through the knot along with the parts.
Work the knot up so that a bight is left on each side of it, and tighten by pulling on the rope at both sides.
Shortening a rope quickly without cutting it, for example to tidy the surplus left over when bundles and baggage are lashed.
When
Unknown; Hasluck describes it in 1907 and Verrill in 1917.
Who devised it
Unknown.
Where the name comes from
Hasluck calls it the 'knot shortening', Verrill and Dana & Pearl the 'bow shortening'; Aldridge gives both names together ('Bow or Knot Shortening').
Its story
One of the simplest ways to take in surplus rope is to fold it into three parts and tie a single overhand knot with all three together. Hasluck (1907) names this method the 'knot shortening'; in his account at least one end of the rope has to be loose, the knot is good enough for medium-sized rope under modest loads, and it is no use on very thick rope. Verrill (1917) draws the same form as the 'bow shortening': it cannot take a heavy pull, yet it does not shake loose by itself, and it is handy for tidying the surplus rope left over when bundles and baggage are lashed. Aldridge (1918) gives both names together.