Lifts a large cask lying on its side using a rope that ends in an eye: the plain end, passed through that eye, makes a running loop round one end of the cask, then goes round the other end and is clove-hitched to its own standing part.
MediumABoK 2169, 458Sailing and boatingLoads and everyday jobs
Lifting and lowering large casks lying on their side, more securely than with can hooks.
When
Unknown; Brady describes it in 1847.
Who devised it
Unknown.
Where the name comes from
The sources do not explain the name; butt and hogshead are names for the large casks the sling lifts.
Its story
The butt sling, or hogshead sling, was a one-piece sling used aboard ship to hoist and lower large casks (hogsheads, butts). Brady in 1847 describes it as a stout rope about five fathoms long with a large thimble spliced into one end, and says it is safer than can hooks; Luce's Seamanship, compiled for the US Naval Academy (third edition, 1868), repeats the same description. The British Admiralty's Manual of Seamanship (1915 printing) lists it first among the ways of slinging a cask. Ashley (1944) adds that when the rope is heavy, the cargo block goes directly onto the span of the sling between the two ends.
Where the cask has to stay upright, head up, while lifted; this sling raises it lying on its side with the bung up.
Weakness
Its hold depends on seating the loop and the last turn between the first two hoops at each end and pulling them tight (Admiralty); done carelessly it cannot be trusted for lifting.