Builds a thick knob on the body of a cable-laid rope by working three of its own small strands round it as a double wall knot; it used to go on the anchor end of a buoy rope.
Finishing the anchor end of a buoy rope: Lever says the knotted end is secured to the anchor's arms with a clove hitch and lashed to the shank with two seizings, one of them right against the knot.
When
Unknown; it is described in Darcy Lever's Sheet Anchor (1843 edition consulted), and Dana (1847 edition), Brady (copyright 1847) and Hasluck (1907) repeat the same description.
Who devised it
Unknown.
Where the name comes from
From the buoy rope on which it was made.
Its story
A buoy rope connects an anchor to the buoy that shows where a ship's anchor is lying on the bottom (Brady). This knot went on the anchor end of that rope. Darcy Lever's 'The Young Sea Officer's Sheet Anchor' (the 1843 American edition was consulted) describes the fitting: two or three feet of the rope's end are opened into strands and the knot is formed; the end is then secured to the anchor's arms just by the crown with a clove hitch and lashed along the shank with two seizings, the second of which sits right against the knot. Only cable-laid rope will take it (a nine-strand rope made by laying three three-strand ropes together): one small strand is drawn from each large strand, and these three are worked round the rope as a double wall knot. Dana's The Seaman's Friend (1847 edition), Brady's The Kedge-Anchor and Hasluck's 1907 book all repeat the same description.
In three-strand or braided rope; it can only be made in cable-laid (nine-strand) rope.
Weakness
You have to open the strands, pick out the small ones, twist the large strands back together and tie off the ends with spunyarn, so it is slow work that takes skill.