Tensions a load, tent line or tarp very tightly with a purchase built from a loop in the rope itself; taking the working end through the loop twice keeps the tension on its own until the end is tied off.
MediumNo ABoK numberLoads and everyday jobsCamping and scoutingTree work
Life safety: This knot is used in climbing, rescue or tree work. This app does not replace hands-on training; for life-safety work, practise under an instructor.
Holding the tension gained from the purchase while the working end is tied off, without needing a second hand; being able to tighten and adjust the hitch one-handed.
When
Unknown; the sources give no date for the self-locking form. Knots 3D traces the trucker's hitch back centuries, to the era of horse-drawn wagons.
Who devised it
Unknown.
Where the name comes from
'Autolocking' means self-locking: the friction of the second pass through the loop holds the tension (Knots 3D). Besides names with the prefix 'Improved' (Improved Trucker's Hitch, Improved Wagoner's Hitch), Knots 3D also lists Power Cinch and Purchase Loop for this form; elsewhere these two names belong to the plain trucker's hitch: power cinch in Wikipedia and Animated Knots ('Power Cinch Knot'), and purchase loop in Knots 3D's own history section.
Its story
The autolocking trucker's hitch is the form of the trucker's hitch in which the working end goes through the loop twice. The trucker's hitch draws a load down tight by turning a loop in the rope and the anchor point into a rough pulley system; Knots 3D says its roots go back several centuries, to the days when carters, street sellers and farmhands hauled goods on horse-drawn wagons, and that motor transport in the 20th century made it widely known as the 'trucker's hitch', while Wikipedia reports that knot author Geoffrey Budworth dates it to the era of horse-drawn carts. In the self-locking form the loop is made with a slip knot rather than a fixed eye, and the working end is taken through it a second time before the hitch is pulled tight; the added friction keeps the tension for a while by itself, so the hitch can often be tightened and adjusted one-handed. Wikipedia makes a similar point: a double pass of the tail through the final loop may add enough friction that nobody has to hold the line tight by hand.
With heavy or critical loads (Wikipedia rates the version with a slipped overhand loop for light to moderate loads), and for lifting loads without hands-on training.
Weakness
Pulling the working end through the loop under tension saws at the rope, so the loop should be moved each time and the rope inspected before use; friction keeps the real advantage well below the theoretical 3 to 1, and none of this replaces hands-on training.